Field Service Ver. 1.0 Jul. 2007
[2]
[1]
[1]
13. Mount the lower unit for the stand
[1]
[2]
A01GF2C591DA
14. Mount two covers [1] which were
A01GF2C592DA
15. Adjust the adjusting plate [1] to
NOTE
• When the height of the setting table
is changed, check for the tilt of the
setting table.
[1]
A01GF2C593DA
table [1] which was removed in step
11, and tighten four screws [2].
removed in step 1.
touches the floor.
See P.34
3. Other
33