Konica Minolta bizhub C203 Service Manual page 369

8. Utility Mode
(5) Format HDD
Functions • To conduct logical formatting of HDD.
Use • To initialize HDD.
NOTE
• It is subject to logical formatting here, therefore if starting with physical for-
matting, follow as [Service Mode] → [State Confirmation] → [Memory/HDD
Adj.] → [HDD Format].
Setting/ 1. Touch [HDD Formatting].
Procedure 2. Select [Yes] on the confirmation screen and touch [OK].
3. Turn off the main power switch and turn it on again more than 10 seconds after.
(6) HDD Encryption Setting
• It can be set only when the optional security kit (SC-503) is mounted.
Functions • To set encryption key necessary to mount the optional security kit SC-503.
Use • To setup security kit SC-503.
• To re-set encrypting word due to exchange of NVRAM board or etc.
NOTE
• This setting is available only when the optional security kit SC-503 is mounted.
• HDD formatting is required after this setting. Therefore it is necessary to
retrieve certain data from HDD in advance.
The following data will be lost after HDD formatting.
➀
Address data
➁
Authentication data : Authentication mode, user authentication setting,
➂
Box setting data
➃
Job history, fax transmission history
Setting/ 1. Press [HDD Encryption Setting].
Procedure 2. Enter encryption key (20 characters) with the keyboard on the operation panel and
press [OK].
NOTE
• Double-byte and identical characters are not acceptable.
3. Turn off the main power switch and turn it on again more than 10 seconds after.
4. Open [Administrator Settings] and conduct HDD formatting according to the instruc-
tion appeared on the panel.
5. Turn off the main power switch and turn it on again more than 10 seconds after.
324
Field Service Ver. 1.0 Jul. 2007
account track setting
: Box and text in the box, setting information of each
box, box for fax