Konica Minolta bizhub C203 Service Manual page 259

8. Utility Mode
C. Auto Sort/Group Selection
Functions • Selects whether to use the auto sort/group selection function when a job has output
of two or more sheets.
Use
Yes : Automatically disables the Auto sort/group selection when a sheet of original
No : Disable the Auto sort/group selection.
Setting/ • The default setting is Yes.
Procedure
D. Default Copy Settings
• This menu is unavailable if user authentication is not made while either of authentication
devices is set to Set in the [Service Mode] → [Billing Setting] → [Management Function
Choice].
• This menu is not available when the key counter is set or when a warning appears to
inform that the vendor's main power switch needs to be checked or coins (a card) are not
inserted under the condition where the vendor is set to Set in the [Service Mode] →
[Billing Setting] → [Management Function Choice].
Functions • To make default settings for the copy mode.
* The machine is initialized at the following timings:
• The main power switch is turned ON.
• Panel is reset.
• In an Interrupt mode.
• Auto Reset
• The password entry screen for account track is changed.
Use • To change the Initial mode setting to meet the user's need.
Setting/ <Current Setting>
Procedure • The settings made on the control panel before entering the setting menu screens are
registered as the default settings of copy functions.
<Factory Default>
• The settings made at the time of shipment from the factory are registered as the
default settings of copy functions.
214
is placed on the ADF and the start key is pressed. Automatically enables the
Auto sort/group selection when two or more sheets of originals are placed on
the ADF and the start key is pressed.
"Yes"
Field Service Ver. 1.0 Jul. 2007
No