Original Tray Width - Konica Minolta bizhub C203 Service Manual

7. Mechanical adjustment
7.4

Original Tray Width

NOTE
Make this adjustment after any of the following procedures has been performed.
• When the document width detection variable resistor has been replaced.
• When the EEPROM has been replaced.
1. Call the Service Mode to the screen.
See P.330 of the main body service manual.
2. Touch [ADF].
3. Touch [Original Tray Width].
[1]
42
4. Widen the width across the edge
A01HF3C001DA
Field Service Ver. 1.0 Jul. 2007
guides [1] by sliding them to the "A3"
position.
A01HF3E525DA