Replacing The Transfer Belt Unit - Konica Minolta bizhub C35 Service Manual

DRAFT
4. PERIODICAL MAINTENANCE PROCEDURE
4.2.3

Replacing the transfer belt unit

A. Periodically replaced parts/cycle
• Transfer belt unit: Every 100,000 counts
B. Replacing procedure
NOTE
Before replacing the transfer belt unit, be sure to perform the following items so that
the machine does not start to print jobs before the counter value of the transfer belt
unit is reset.
• Make sure that the machine does not have print jobs and fax reception data wait-
ing to print.
• Be sure to disconnect the USB cable, (the network cable, and the fax cable) from
the machine.
1. Turn OFF the power switch.
2. Remove the toner cartridge (C,M,Y,K).
See P.8
3. Remove the waste toner bottle.
See P.14
4. Remove the imaging unit (C,M,Y,K).
See P.11
16
5. Open the right door [1].
[1]
A121F2C513DA
6. Remove the top part [1] of the right
door.
[1]
A121F2C514DA
Field Service Ver. 1.0 Feb. 2010