Konica Minolta bizhub C203 Service Manual page 478

Field Service Ver. 1.0 Jul. 2007
H. Vendor 2
Functions • To set whether or not the vendor 2 is installed.
Use • Set when the vendor 2 is mounted.
NOTE
• When using the vendor along with the key counter, inserting the key counter
will set it to the "Key Counter Mode" and removing it will set it to the "Vendor
Mode".
Setting/ • Select color mode and message of key counter.
Procedure (Only for key counter, the type of the color mode and message are same after mount-
ing.)
✽ Confirmation copy
• Set whether to allow a confirmation copy when a key counter is installed.
• The default setting is Ban.
✽ The next job reservation
• Set whether to allow the reservation of the next job when a key counter is installed.
• The default setting is Ban.
• Select message of vendor.
✽ Message
Type 1: Message for key counter
Type 2: Message for card scanning
Type 3: Message for ID management
NOTE
• The setting is available only when user authentication and account track are
set "OFF" with [Administrator Settings] → [User Authentication/Account
Track] → [General Setting].
License
License
12. Billing Setting
"Ban"
"Ban"
433