Konica Minolta bizhub C203 Service Manual page 338

Field Service Ver. 1.0 Jul. 2007
<Printer Settings: Printer Location>
Functions
• To set the WSD printer location.
Use
Setting/ 1. Touch [Printer Location].
Procedure 2. Enter the friendly name (up to 63 characters) on the on-screen keyboard, and touch
[OK].
<Printer Settings: Printer Information>
Functions
• To set the WSD printer information.
Use
Setting/ 1. Touch [Printer Information].
Procedure 2. Enter the friendly name (up to 63 characters) on the on-screen keyboard, and touch
[OK].
(3) Scanner Settings
<Scanner Settings>
Functions
• To set whether to use this machine as a WSD scanner.
Use
Setting/ • The default setting is ON.
Procedure
<Scanner Settings: Scanner Name>
Functions
• To set the WSD scanner name.
Use
Setting/ 1. Touch [Scanner Name].
Procedure 2. Enter the friendly name (up to 63 characters) on the on-screen keyboard, and touch
[OK].
<Scanner Settings: Scanner Location>
Functions
• To set the WSD scanner location.
Use
Setting/ 1. Touch [Scanner Location].
Procedure 2. Enter the friendly name (up to 63 characters) on the on-screen keyboard, and touch
[OK].
<Scanner Settings: Scanner Information>
Functions
• To set the WSD scanner information.
Use
Setting/ 1. Touch [Scanner Information].
Procedure 2. Enter the friendly name (up to 63 characters) on the on-screen keyboard, and touch
[OK].
"ON"
8. Utility Mode
OFF
293