Konica Minolta bizhub C203 Service Manual page 320

Field Service Ver. 1.0 Jul. 2007
E. SMB Setting
• It will not be displayed when the following setting shows that authentication device is
mounted.
[Service Mode] → [Billing Setting] → [Management Function Choice]
(1) Client Settings
Functions • To set whether or not to use the SMB transmission setting.
• To set whether or not to enable the user authentication setting by NTLM.
• To set the NTLM version for the user authentication.
Use • To use when setting the SMB transmission setting.
• To use when conducting the user authentication by NTLM (NT LAN Manager).
• To use when changing the NTLM version for user authentication.
NTLM has v1 and v2. Select the version which suits the network environment.
Setting/ <Client Settings>
Procedure • The default setting is ON.
<NTLM Settings>
• The default setting is v1.
<User Authentication (NTLM)>
• The default setting is ON.
(2) Print Settings
Functions
• To set whether to use SMB port or not in printer mode.
Use
Setting/ • The default setting is ON.
Procedure
(3) Print Settings: NetBIOS Name
Functions • To set NetBIOS name.
Use • To set NetBIOS name.
Setting/ 1. Touch [NetBIOS Name].
Procedure 2. Enter the NetBIOS name (up to 15 characters) on the on-screen keyboard, and
touch [OK].
(4) Print Settings: Print Service Name
Functions • To set the print service name.
Use • To set the print service name.
Setting/ 1. Touch [Print Service Name].
Procedure 2. Enter the print service name (up to 13 characters) on the on-screen keyboard, and
touch [OK].
"ON"
"v1"
"ON"
"ON"
OFF
v2
OFF
OFF
8. Utility Mode
v1/v2
275