Konica Minolta bizhub C203 Service Manual page 418

Field Service Ver. 1.0 Jul. 2007
(2) Receive
<E-mail Address>
Functions • To set the e-mail address used for the CS Remote Care.
Use • To set the e-mail address.
Setting/ • The default setting is No.
Procedure • Up to 129 characters (alphanumeric characters and symbols) can be used.
<Mail Check>
Functions • To set whether or not to use mail check and the time interval for the POP server used
for the CS Remote Care.
Use • To set whether or not to use mail check and the time interval for the POP server used
for the CS Remote Care.
• To change the time interval for mail check.
Setting/ • The default setting is No.
Procedure
<Connection timeout>
Functions • To set the timeout period for connection during reception.
Use • To change the timeout period for connection during reception.
Setting/ • The default setting is 60 Sec.
Procedure
<APOP Authentication>
Functions • To set whether or not to authenticate the APOP during reception.
Use • To authenticate the APOP during reception.
Setting/ • The default setting is No.
Procedure
(3) Send
<SMTP server>
Functions • To set the SMTP sever address for transmission used for the CS Remote Care.
Use • To set the SMTP server address.
• SMTP server address can be set by the IP address or the domain name.
Setting/ <Input IP Address>
Procedure • IP address version 4 format
[0 to 255].[0 to 255].[0 to 255].[0 to 255]
<Input FQDN>
• Enter the domain name.
"No" (1 to120 min., No)
"60 Sec" (30 to 300 Sec)
Yes
10. Service Mode
"No"
373