Konica Minolta bizhub C203 Service Manual page 360

Field Service Ver. 1.0 Jul. 2007
B. User Box Admin. Setting
Functions • To set whether to allow or restrict the box administrator to use the system.
Use • To allow the box administrator to use the system.
The box administrator is the special administrator for box, who is allowed to browse
contents in common box / individual box without the password.
NOTE
• [Allow] cannot be set when the user authentication or account track is not car-
ried out.
Setting/ • The default setting is Restrict.
Procedure
NOTE
• [Allow] cannot be selected when user authentication and account track are not
conducted.
• [Allow] cannot be selected when the following setting is set to "ON."
[Administrator Settings] → [Security Settings] → [Enhanced Security Mode]
• Set the password when setting to [Allow].
NOTE
• When the following setting shows that [Password Rules] is set to "ON", the
Password using only a single letter or the password same with the previous
one, or the password with less than eight letters cannot be accepted.
[Administrator Settings] → [Security Settings]
C. Administrator Security Levels
• It will not be displayed when the following setting shows that vendor or authentication
device 1 is mounted.
[Service Mode] → [Billing Setting] → [Management Function Choice]
Functions • To set the level for administrator settings item open to the user.
Use • To make part of the administrator settings items open to the user.
Level 1 : [Power Save Setting], [Auto Magnification Selection (Platen)], [Auto
Level 2 : [Power Save Setting], [Output Setting], [Date/Time Setting], [Daylight
Prohibit : Not to allow the user to set neither Level 1 nor Level 2
Setting/ • The default setting is Prohibit.
Procedure
Allow
Magnification Selection (ADF)], [Specify Default Tray when APS Off],
and [Select Tray for Insert Sheet] are available to users.
Savings Time Setting], [AE Level Adjustment], [Auto Magnification
Selection (Platen)], [Auto Magnification Selection (ADF)], [Specify
Default Tray when APS Off], [Select Tray for Insert Sheet], and [Print
Jobs During Copy Operation] are available to users.
Level 1
"Restrict"
Level 2 "Prohibit"
8. Utility Mode
315