Konica Minolta bizhub C203 Service Manual page 406

Field Service Ver. 1.0 Jul. 2007
Step
Using the telephone
line modem
Selecting the CS
Remote Care function
Select [Service Mode]
3
→ [CS Remove Care]
→ [System Selection],
and touch [Modem].
Inputting the ID Code
1. Select [Service Mode] → [CS Remote Care] → [ID Code], and touch [ID Code].
4
2. Input the seven digits ID of the service person, and touch [ID Code] again.
See P.369
Setting the date and time for CS Remote Care
1. Select [Service Mode] → [CS Remote Care], and touch [Detail Setting].
5 2. Touch [Date & Time Setting].
3. Input the date, time and the time zone using the 10-key pad, and touch [Set].
See P.370
Setting the Center ID
1. Select [Service Mode] → [CS Remote Care], and touch [Detail Setting].
6
2. Touch [Machine Setting] → [Center ID], and input the Center ID (five digits).
See P.370
Setting the Device ID
1. Select [Service Mode] → [CS Remote Care], and touch [Detail Setting].
7
2. Touch [Machine Setting] → [Device ID], and input Device ID (nine digits).
See P.370
Proceed to step 9.
8
Setting the telephone number of the Center
1. Select [Service Mode] → [CS Remote Care],
and touch [Detail Setting].
2. Touch [Machine Setting] → [Center Tele-
9
phone Number].
3. Input the telephone number of the center
using the 10-keys pad and [P], [T], [W], [-].
See P.370
Inputting the device telephone number
1. Select [Service Mode] → [CS Remote Care],
and touch [Detail Setting].
2. Touch [Machine Setting] → [Device Tele-
10
phone Number].
3. Input the Device telephone number using the
10-key pad and [P], [T], [W], [-].
See P.370
Procedure
Using the Fax line
modem *1
Selecting the CS Selecting the CS Remote Care function
Select [Service Mode] → [CS Remote Care] →
Remote Care function
Select [Service Mode] [System Setting], and touch [E-Mail 1] or [E-
→ [CS Remove Care]
Mail 2].
→ [System Selection],
and touch [Fax].
Encryption setting
1. Select [Service Mode] → [CS Remote Care],
2. Touch [Basic Setting] and select either
Retransmission interval on e-mail delivery error
• When selecting [E-mail2], set the retransmis-
See P.363
Setting the Respond Timeout
1. Select [Service Mode] → [CS Remote Care],
2. Touch [Respond Timeout] and enter the
NOTE
• Under normal conditions, there is no
See P.370
Proceed to step 11.
10. Service Mode
Using E-mail
and touch [Detail Setting].
Encryption or No Encryption.
sion interval on e-mail delivery error in soft-
ware SW setting.
and touch [Detail Setting].
response timeout using the 10-key pad.
need to change the default setting.
361