Konica Minolta bizhub C203 Service Manual page 610

Field Service Ver. 1.0 Jul. 2007
18.3.22 Printer monocolor: void areas, white spots
A. Typical faulty images
B. Troubleshooting procedure
Step Section
Image Check
1
2
Imaging unit
3
4
Toner cartridge
5
Installation
environment
6
Void areas
Check item
There are void areas at the front
side or high density section.
There is void area at the rear side
section.
The surface of the PC drum is
scratched.
Dirty on the outside.
Foreign matter or caked toner in
the toner cartridge.
Is the atmospheric pressure at the
installation site low?
18. Image quality problem
White spots
Result Action
YES
See P.560
YES Perform [Transfer Adjust] of
[Image Process Adjustment]
under Service Mode.
YES Change imaging unit.
YES Clean.
YES Remove foreign matter.
YES Make the following adjustment:
[Service Mode] → [Image Pro-
cess Adjustment] → [Dev. Bias
Choice].
A02EF4C523DA
565