Konica Minolta bizhub C203 Service Manual page 851

2. Periodical check
[1]
[3]
8
[2]
A01GF2C555DA
[1]
[2]
A01GF2C553DA
[1]
[2]
A01GF2C556DA
Field Service Ver. 1.0 Jul. 2007
3. Loosen two screws [1] and remove
the paddle holder assy [2].
4. Remove two paddles [1] [2] and
replace them with new ones.
NOTE
• When installing new paddles, be
sure to install the paddle covered
with black film [1] and the paddle
covered with transparent film [2] to
their original position.
• If there is difficulty in installing the
paddles, apply alcohol to the root of
the paddles and install them.
5. Install the paddle holder assy [1].
NOTE
• To reinstall the paddle holder assy,
place it where its locating pin [2] is
aligned with the hole on the shaft.
Attach the paddle holder assy onto
the shaft by first pressing the assy
on the side where the shaft has a
depression [3].