Finisher Operations; Entering Finisher; Finisher Check - Konica Minolta bizhub C203 Service Manual

6. Finisher operations

6. Finisher operations
6.1

Entering Finisher

1. Call the Service Mode to the screen.
See P.330 of the main body service manual.
2. Touch [Finisher].
3. Touch [CB-FN adjustment].
4. Touch [Finisher Check].
5. Touch the item one wants.
6.2

Finisher Check

A. Staple CD Unit
• Returns the staple unit to the predetermined position after it moves to the 2-point stapling
position for A4.
→ Moves from the predetermined position to the inner 2-point stapling position for A4.
→ Moves from the starting position and stops after the predetermined time.
→ Moves to the front of A4.
→ Moves from the starting position and stops after the predetermined time.
→ Moves to the predetermined position.
→ The operation is finished.
B. Alignment Moving
• Aligning plates 1 and 2 return to the predetermined position after moving to the aligning
position for A4S.
→ Moves from the predetermined position to the second predetermined position for A4S.
→ Stops after the predetermined time.
→ Moves to the aligning position for A4S.
→ Stops after the predetermined time.
→ Moves to the predetermined position.
→ The operation is finished.
62
Field Service Ver. 1.0 Jul. 2007
A01GF3E506DA