Table of Contents
Advertisement
Connecting devices and
establishing
communication
Learn how to connect external devices to the projector.
Communication and input ports are located on the projector side input panel (operator side).
Video Input panel
The Video Input panel has a variety of ports that can be used for control, 3D sync, upgrading,
retrieving interrogators, and connecting audio.
Video Input panel components
The following table lists the video components available depending if the card cage has VOM-HBI or
VOM-IF connections. The images below illustrate the connections available for both options.
ID
Port
A
HDMI
B
SDI
C
DisplayPort
D
Christie Link
E
SDVoE
F
USB -C
G
USB 3.0-A
Christie Griffyn Series Installation and Setup Guide
020-103314-12 Rev. 1 (07-2023)
Copyright
©
2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Description
Accept digital video data from HDMI 2.0 input
with HDCP 2.2 and 1.4 support.
Accepts digital video data from 12G, 6G, 3G, and
HD SDI sources.
Accepts digital video data from DisplayPort 1.2
input with HDCP 1.3 support.
Accept digital video data from QSFP+ 40 GB
optical Christie Link input.
Accept digital video data from SDVoE input.
Connects a USB-C flash drive that has been
formatted with a FAT32 file system. Can be used
for upgrades, backups, restores, and
interrogators.
Connects a USB flash drive that has been
formatted with a FAT32 file system. Can be used
for upgrades, backups, restores, and
interrogators.
Default
SDVoE
enabled
enabled
X
X
X
X
X
X
X
52
Advertisement
Table of Contents
