Web Monitor; Telnet Access - Sony IPELA PCS-XG100 Operating Instructions Manual

Disabled: Does not require the password
when saving the Shared Phone Book
settings.
Administrator5
Streaming/
Recording
Streaming
Select whether to enable the streaming
broadcast.
Enabled: Permits the streaming broadcast.
Disabled: Does not permit the streaming
broadcast of a videoconference.
Recording
Select whether to enable the recording of
video and audio to a USB storage device.
Enabled: Permits the recording.
Disabled: Does not permit the recording.
Video
Select a bit rate for streaming and recording
video.
512Kbps: Streams and records video at
512 Kbps.
1Mbps: Streams and records video at
1 Mbps.
Multicast Address
Enter the multicast address for streaming
broadcasts.
Note
You can enter the unicast address in this menu.
If you set the unicast address, enter two or more
different numbers in "Audio Port Number" and
"Video Port Number" for streaming
broadcasts.
Audio Port Number
Enter the audio port number for streaming
broadcasts.
Video Port Number
Enter the video port number for streaming
broadcasts.
HOP
Enter a number from 0 to 255 as the HOP for
streaming broadcasts.
94
Registering Local Information
Administrator6
Access Permit
Note
Depending on the operating environment,
unauthorized third parties on the network may
be able to access the system. When you set
"Web Monitor", "Web Access", "Telnet
Access", or "SSH Access" to "On" or
"Enabled", the following confirmation screen
will appear.
To confirm the change in the setting, select
"Accept" and configure all of the passwords on
the Password page (page 91) of the
Administrator setup menu. The setting will not
be changed if you select "Cancel".

Web Monitor

Allows you to permit the monitoring
communication status through a Web
browser (automatic update of JPEG images).
On: Permits monitoring with a Web
browser.
Off: Does not permit monitoring with a Web
browser.
Web Access
Select whether to permit access to the
Communication System via a Web browser.
Enabled: Permits access via a Web browser.
Disabled: Prohibits access via a Web
browser.

Telnet Access

Select whether to permit access to the
Communication System via Telnet.
Enabled: Permits access via Telnet.
Disabled: Prohibits access via Telnet.
SSH Access
Allows you to select whether to permit
access to the Communication System via
SSH (Secure Shell).
Enabled: Permits access via SSH.
Disabled: Prohibits access via SSH