Sony IPELA PCS-XG100 Operating Instructions Manual page 131

Phone Book
Index
Group Select None Specified
IP
Dial to:
More Options
3
Set the items in the List Edit menu.
Use the V, v, B or b button and the ENTER button on the Remote
Commander to select the setup item.
To enter the characters, use the number buttons on the Remote Commander
or the displayed on-screen keyboard, and press the ENTER button. To
select the item, use the V, v, B or b button and press the ENTER button.
Index
Enter the name of a remote party in the Index text box. You can use up to
39 letter and number characters.
Group Select
Select the group set in the Phone Book.
Dial to:
Enter the IP address or line number of a remote party depending on the line
interface you select.
When you select "IP" from "Line I/F": Enter the remote party's IP
address. Enter the host name and domain name (ex. host.domain) when
using the DNS server, or enter the party's user name and user number
when using the gatekeeper (page 80).
When you select "ISDN" from "Line I/F": Enter the remote party's line
number. If you register the sub-address in the Phone Book, enter an
asterisk between the line number and sub-address. The sub-address can
only be composed of numbers.
When "More Options Enable" is set to "On" in the Dial setup menu
(page 66), six line input text boxes, A1, A2, B1, B2, C1 and C2, are
displayed. Be sure to enter the remote party's number to the A1 text
box.
When you select "TEL" from "Line I/F": Enter the telephone number of
a remote party. (ex. 0390123456)
When you select "SIP" from "Line I/F": Enter the address of a remote
party or the number assigned by the SIP server.
The format of the address is the following:
• 4000 (number assigned by the SIP server)
• 4000@sip.com
• 192.168.1.1 (when the IP address and SIP server are not used)
One-Touch Dial
None Specified
Specified
IP
Line I/F
Communication
1Mbps
Bit Rate
2B (128K)
Number of Lines
Save Cancel
Registering a Remote Party – Phone Book
131