Trap Destination; User Number - Sony IPELA PCS-XG100 Operating Instructions Manual

Note
When the authentication function is disabled,
registration may not be possible depending on
the gatekeeper.
Login name
When "Authentication" is set to "On", enter
the login name specified by the gatekeeper
administrator here.
Password
When "Authentication" is set to "On", enter
the password specified by the gatekeeper
administrator here.
LAN
Gatekeeper: IPv6
Notes
• This appears when "Internet Protocol" is set
to "IPv4/IPv6" in the Administrator setup
menu.
• "IPv4/IPv6" for "Internet Protocol" will be
supported in version 2.0.
Gatekeeper Mode
Allows you to select whether to use the
gatekeeper to control access to a LAN.
Using the gatekeeper allows you to dial
using the user name or user number as well
as dialing using the IP address.
Auto: Automatically detects the gatekeeper
and uses it.
On: Enables the gatekeeper.
Off: Disables the gatekeeper.
Gatekeeper Address
Enter the address of the gatekeeper used
when "Gatekeeper Mode" is set to "On".
User Alias
Enter the user name (H.323 alias) registered
in the gatekeeper.

User Number

Enter the user number (E.164 number)
registered in the gatekeeper.
Authentication
Select whether to use the gatekeeper's
authentication function.
On: Use the gatekeeper's authentication
function.
Off: Do not use the gatekeeper's
authentication function.
Note
authentication
When the
registration may not be possible depending on
the gatekeeper.
Login name
When "Authentication" is set to "On", enter
the login name specified by the gatekeeper
administrator here.
Password
When "Authentication" is set to "On", enter
the password specified by the gatekeeper
administrator here.
LAN
Used Port
Number, RTP/RTCP Setup
Q.931
Enter the Q.931 port number.
H.245
Enter the H.245 port number.
RTP/RTCP
Enter the RTP/RTCP port number.
MTU Size
Enter the MTU size.
LAN
SNMP
SNMP Mode
Allows you to select whether the Simple
Network Management Protocol (SNMP)
agent is enabled.
On: Enables the SNMP agent.
Off: Disables the SNMP agent.

Trap Destination

Enter the address of the trap destination
SNMP manager.
Community
Enter the community name managed by the
SNMP manager (up to 24 characters). By
default, "public" is entered.
Registering Local Information
function is disabled,
81