Sony IPELA PCS-XG100 Operating Instructions Manual page 146

The Camera menu appears.
2
Select the camera to be adjusted.
During communication pressing the F1 button on the Remote Commander
switches between the camera on the local site and that on the remote site.
When two cameras are connected, pressing the F2 button on the Remote
Commander switches between the first and second cameras.
The selected camera is shown at the top of the Camera menu.
3
Use the V, v, B or b button on the Remote Commander to select
"Brightness", then press the ENTER button.
The Brightness adjustment menu appears.
4
Press the ENTER button on the Remote Commander.
5
Use the V, v, B or b button on the Remote Commander to select "Manual
Adjustment", then press the ENTER button.
The brightness adjustment bar is selected.
146
Adjusting the Camera
Camera
Previous
Adjustments
Brightness
Preset
Details
Adjustments > Brightness
Auto Adjustment
Previous
5/11/2008 13:00
5/11/2008 13:00