Restrictions On The Use Of Lan2 (Pcs-Xg100/Xg100S Only) - Sony IPELA PCS-XG100 Operating Instructions Manual

Hd visual communication system
Hide thumbs Also See for IPELA PCS-XG100:
Table of Contents

Advertisement

Restrictions on the
Use of LAN2
(PCS-XG100/XG100S
only)
When you use two LAN connections, use
the
1 (LAN1) connector to connect to a
private network in your company and the
2 (LAN2) connector to connect to the
internet or locations outside of your
company.
The following functions of the system are
restricted when using the
connector.
Notes
• When connecting the system to the internet
or locations outside of your company,
configure the following settings.
– When using only the
connector, set "Web Access", "Telnet
Access" and "SSH Access" to "Disabled"
on the Access Permit page (page 94) of the
Administrator setup menu.
– When using both the
connector and the
connector, use the
to connect to the internet or outside
locations.
• The
2 (LAN2) connector cannot be used
on its own.
Items that cannot be set with LAN2
• NAT Mode
• Gatekeeper
• SNMP Mode
• SIP
• NTP
• Shared Phone Book
• AMX Device Discovery
• H.460
• DNS
• Streaming
• IPv6
• Web Access, Telnet Access, SSH Access
2 (LAN2)
1 (LAN1)
1 (LAN1)
2 (LAN2)
2 (LAN2) connector

Restrictions on the Use of LAN2 (PCS-XG100/XG100S only)

Item that can be set with either
LAN1 or LAN2
• PPPoE
Items to be set with LAN1 or LAN2
individually
• DHCP Mode
• IP Address
• Network Mask
• Gateway Address
• LAN Mode
Items to be set with LAN1 and LAN2
commonly
• Used Port Number (TCP, UDP)
• QoS
• TOS
• Auto Answer
• Reject Answer
Note
Do not set the same subnet for the LAN1 and
LAN2 connections.
103

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ipela pcs-xg100sIpela pcs-xg77Ipela pcs-xg77s

Table of Contents