System Connection Via A Lan - Sony IPELA PCS-XG100 Operating Instructions Manual

System Connection via a LAN

Camera cable
to CAMERA
to
HDMI-1
OUT
HDMI cable
to HDMI IN
Notes
• Normally, connect the UTP cable to the
If the UTP cable is connected to the
of your system may be restricted.
For details, see "Restrictions on the Use of LAN2 (PCS-XG100/XG100S
only)" on page 103.
• The REC OUT jack is used to make an audio recording of a communication. This is
not used during regular communication.
SRG-120DH HD Camera Unit
to HDMI,
VISCA IN,
DC 12V
to MIC (A1)
3)
2)
to 1
UTP cable (category 6, straight)
1) The HDMI IN, HDMI-2 OUT, and
5)
TV monitor
2)
3) Supplied
4) Supplied (Japan only)
5) Not supplied
to a wall outlet
6) Supplied with the PCS-XG100/XG77
6)
PCS-A1 microphone
PCS-XG100S/XG77S
Visual Communication System
to DC19.5V
3)
AC adaptor
5)
connectors are not available on the
PCS-XG77S.
connector on the PCS-XG77S
1 (LAN1) connector (indicated in green).
2 (LAN2) connector, some of the functions
System Connections
1)
HD
4)
Power cord
to a wall outlet
to LAN
2
35