Note
When "SIP (UC) Mode" is set to "On", the SIP setup menu cannot be configured
and will be grayed out and its settings will be disabled.
2
Enter the appropriate values for each item in the "SIP (UC) 1" page of the
SIP (UC) setup menu.
3
Enter the appropriate values for each item in the "SIP (UC) 2" page of the
SIP (UC) setup menu.
To connect to a remote party
While "SIP (UC) Mode" is set to "On" in the Administrator setup menu, enter
"<Registered User Name>@<Domain Name>" for the remote party in the
number entry field, and dial.
Example:
user1@domain.com
114
Setting Up the Network Configurations
Setup
SIP(UC) 1
SIP(UC) 1
SIP(UC) Server Address
SIP(UC) Server Port
Status
Transport Protocol
SIP(UC) Port Number
SIP(UC) Domain
Registered User Name
Password
Setup
SIP(UC) 2
SIP(UC) 2
AD Server
Status
Authentication Method
Certificate
Status
192. 168. 0. 101
5061
UDP
5061
example.com
user2
password2
Save
Cancel
192.168.0.102
Kerberos
Save
Cancel