Sony IPELA PCS-XG100 Operating Instructions Manual page 149

8
When you want to register a thumbnail, use the V, v, B or b button on the
Remote Commander to select "Thumbnails" and press the ENTER button
to check the checkmark for "Register in Thumbnail/List".
The currently displayed image will be registered as the thumbnail.
9
Use the V, v, B or b button on the Remote Commander to select "Save",
then press the ENTER button.
The angle and zoom settings are stored in the selected number, and the
preset number is listed in the Preset Setting List.
To move the camera to the preset position
1
Press the CAMERA button on the Remote Commander, or press the V, v,
B or b button to select "Camera" in the Home menu and press the ENTER
button.
The Camera menu appears.
2
Use the V, v, B or b button on the Remote Commander to select "Preset"
in the Camera menu, then press the ENTER button.
The Preset Setting List appears.
3
Use the V, v, B or b button on the Remote Commander to select the preset
number you want to recall, then press the ENTER button.
You can also recall the preset numbers 1 to 6 by pressing the number
buttons 1 to 6 on the Remote Commander.
The submenu appears.
4
Press the V, v, B or b button on the Remote Commander to select "Load",
then press the ENTER button.
The camera moves to the selected preset position.
Note
You can select the items below from the submenu:
"Cancel": Cancels selection of the preset position.
"Edit": Changes the selected preset position.
"Delete": Deletes the selected preset position.
Adjustments > Preset Setting List
Local Camera : First Camera
New Entry
Back to Home
1 2
4 5
3
6
Adjusting the Camera
149