Using the Supplied Hook-
and-Loop Pads
You can secure the camera to the installation
location using the supplied five sets of hook-
and-loop pads.
Stick the hook-and-loop pads to the
attachment locations on the bottom of the
camera and the other pads to the installation
location, and press both sets of pads to each
other until they snap together.
Note
The supplied hook-and-loop pads are attached
to prevent the camera from falling down or
falling from an installation location. Do not use
them for attaching the camera to the HD Visual
Communication System. Doing so and lifting
the Communication system by the camera may
cause the system to fall or result in damage to
the connection cable.
236
HD Camera Unit Parts Identification
HD Camera Unit
Parts Identification
SRG-120DH
Note
This camera unit is supplied with the
PCS-XG100/XG77.
Camera
Front
1
2
3 4
a Lens
This is a 12-magnification optical zoom
lens.
b Infrared remote commander
sensors
Used only for servicing.
c POWER lamp
The green lamp lights when the system
is turned on.
2