Viewing The Picture From The System On A Monitor Or Projector - Sony IPELA PCS-XG100 Operating Instructions Manual

Viewing the Picture from the System on
a Monitor or Projector
When the monitor or projector is connected to the Communication System,
you can view the picture from the system.
To connect a monitor or projector
to DVI-I OUT
To use the connected display equipment
When outputting the picture both to the monitor connected to the HDMI-1
OUT connector and the display equipment connected to the DVI-I OUT
connector, set "Monitor Output" to "HDMI 1 + DVI-I OUT" on the Basic
Setup page of the Video setup menu (page 75).
You can select the format of the video signal output with the "DVI-I Monitor
Output Format" setting. (page 76)
Note
If "Monitor Output" is set to "HDMI 1 + DVI-I OUT", "HDMI 1 + HDMI 2", or "Triple
monitors" when no HDMI monitor is connected to the Communication System, you
cannot view the menus. Before making this setting, be sure to connect an HDMI
monitor.
to HDMI-1 OUT
DVI cable (not supplied)

Viewing the Picture from the System on a Monitor or Projector

Monitor
to HDMI IN
HDMI cable
(supplied)
Monitor, projector,
etc.
to DVI IN
179