Home Menu Setup Menu; Display Indicator; Menu Transparency - Sony IPELA PCS-XG100 Operating Instructions Manual

Display Indicator

On: Displays indicators such as those for a
USB storage device or tablet.
Off: Does not display the indicators.
Communication Mode Display
On: Displays the communication mode
when the system is connected to the
remote site.
Off: Does not display the communication
mode when the system is connected to
the remote site.
Display On-Screen Keyboard
On: Displays the on-screen keyboard.
Off: Does not display the on-screen
keyboard.
For details on the on-screen keyboard, see
"Entering Characters Using the On-Screen
Keyboard" on page 60.

Menu Transparency

Allows you to select the degree of
transparency of the superimposed menu
display over the background picture. You
can select from among "High", "Medium"
and "Low".
General4
Function Keys in
Communication
Allows you to switch the picture with one
press of a button on the Remote
Commander.
You can set the function to be assigned to
each of the F1 to F4 (function) buttons.
Notes
• You cannot set "Function Keys in
Communication" during communication. Set
this item before starting communication.
• The "HDMI" setting is not available on the
PCS-XG77/XG77S.
F1
Allows you to select the video input
switched by pressing the F1 button on the
Remote Commander. You can select from
among "Far/Near", "Camera", "HDMI",
"DVI-I 1", "DVI-I 2" and "No Operation".
This item is preset to "Far/Near" at the
factory. This setting allows you to switch the
cameras to be controlled between the local
and remote sites during communication by
pressing the F1 button on the Remote
Commander.
Note
Even if "F1" is set to any option other than
"Far/Near", "F1" is fixed to "Far/Near" while
the Video Input or Layout menu is displayed on
the screen. In some other cases, the function of
the F1 to F4 buttons may be fixed regardless of
the setting for practical convenience, in which
case the functions of the button are shown in
the instruction display.
F2
Allows you to select the video input
switched by pressing the F2 button on the
Remote Commander. You can select from
among "Camera", "HDMI", "DVI-I 1",
"DVI-I 2" and "No Operation".
F3
Allows you to select the video input
switched by pressing the F3 button on the
Remote Commander. You can select from
among "Camera", "HDMI", "DVI-I 1",
"DVI-I 2" and "No Operation".
F4
Allows you to select the video input
switched by pressing the F4 button on the
Remote Commander. You can select from
among "Camera", "HDMI", "DVI-I 1",
"DVI-I 2" and "No Operation".

Home Menu Setup Menu

Home Menu1
Home Menu1
Allows you to select the items that show or
hide in/from the Home menu.
Note
Some items may not be set during
communication.
Clock Display
On: Allows display of the current time in the
Home menu.
Off: Does not display the current time.
Registering Local Information
89