Evi-H100V - Sony IPELA PCS-XG100 Operating Instructions Manual

Note
The factory default position is "1". Do not
change this position, as the other positions
are used only for servicing.
i VIDEO OUT connector
Supplies the image as digital signals. An
analog component signal is also output
from this connector.
j VISCA IN connector
To communicate via RS-232C, use this
connector. When you connect multiple
cameras, connect it to the VISCA OUT
connector of the previous camera in the
daisy chain connection.
k VISCA OUT connector
When you connect multiple cameras,
connect it to the VISCA IN connector of
the next camera in the daisy chain
connection.
l DC 12V connector
Connect the supplied camera cable.
Bottom
qd qf qg
qg
m BOTTOM switches
This switch is used only for servicing.
Note
Do not change the factory default position
displayed at the bottom of the unit.
n Tripod screw hole
o Ceiling bracket mounting screw
holes
Important
The nameplate is located on the bottom.

EVI-H100V

Note
This camera unit is not supplied with the
PCS-XG100/XG77/XG100S/XG77S.
Camera
Front
2
qg a Lens
This is a 20-magnification optical zoom
lens.
HD Camera Unit Parts Identification
1
3 4
239