Turning On/Off The Tv Monitor; Terminal - Sony IPELA PCS-G50 Operating Instructions Manual

Turning On/Off the TV Monitor Together With the Communication

Terminal

If you use a Sony TV, insert the IR repeater under the remote sensor of the TV.
Once you set the IR repeater, the TV will turn on or go to standby together with
the Communication Terminal when you press the
Remote Commander.
DC 19.5V
IR OUT
AUX CONTROL
1 2 CTRL-S
to IR OUT
Note
If the TV monitor is not turned on by pressing the
Commander, change the "IR Repeater Mode" setting in the General Setup menu.
For details on the "IR Repeater Mode" setting, see "General Setup Menu" on
page 56.
TERMINAL VISCA OUT
AUDIO OUT AUDIO IN VIDEO IN
(MIXED) AUX LINE CAMERA
MIC
(PLUG IN POWER)
1 2
WHITE 1
1 2
EC-MIC RGB OUT BOARD
1 2
AUX MONITOR
VIDEO OUT
@ 1 button on the supplied
/
TV monitor
Remote sensor
IR repeater (supplied)
@ 1
/ button on the Remote
Preparing the System
29