Sony IPELA PCS-XG100 Operating Instructions Manual page 248

c DVI-I 1 IN connector
Connect to the DVI output of the
optional camera unit or video
equipment.
d DVI-I 2 (PC) IN connector
Connect to the DVI output of the
optional computer or video equipment.
e MIC (A1) 1 (R) / 2 (R) / 3 (R) / 4 (L)
/ 5 (L) / 6 (L) jacks (minijack)
Connect to the PCS-A1 microphones
(supplied). Power is supplied to the
microphones from the System.
f AUDIO 1 IN L/R and AUDIO 2 IN
L/R jacks (phono jack)
Connect to the audio outputs of the
optional VCR or audio equipment.
g AUDIO OUT L/R jacks (phono
jack)
Connect to the audio inputs of the TV
monitor.
h REC OUT L/R connectors (phono
jack)
Used when recording the audio signals
to minute a communication. The mixed
sounds of the local and remote parties
are output from these connectors.
i HDMI-1 OUT connector
Connect to the HDMI input of the
optional TV monitor.
CAUTION
When you connect the HDMI cable of the
unit to peripheral device, use the supplied
cable to prevent malfunction due to
radiation noise.
j HDMI-2 OUT connector
(PCS-XG100S only)
Connect to the HDMI input of the
optional TV monitor.
Note
We recommend using Sony's HDMI
cable.
248
Location and Function of Parts and Controls
k DVI-I OUT connector
Connect to the DVI input of the optional
computer or video equipment.
l
1 (LAN1) connector
(1000BASE-T/100BASE-TX/
10BASE-T, 8-pin modular)
Used to connect via a LAN or a SIP.
Connect to a hub or a SIP server using
the category 6 cable.
Note
This connector is labeled
PCS-XG77S.
m
2 (LAN2) connector
(1000BASE-T/100BASE-TX/
10BASE-T, 8-pin modular)
(PCS-XG100S only)
Used to connect via a LAN. Connect to
a hub, etc. using the category 6 cable.
CAUTION
For safety, do not connect the connector
for peripheral device wiring that might
have excessive voltage to the following
ports.
: (LAN) 1 connector
: (LAN) 2 connector
Follow the instructions for the above ports.
n ISDN UNIT connector
Connect to the TERMINAL connector
on the optional PCSA-B384S or
PCSA-B768S ISDN Unit.
o AUX CONTROL connector (D-sub
9-pin)
Used for maintenance service.
p MAINTENANCE connector (D-sub
9-pin)
Used for maintenance service.
q DC 19.5V jack
Connect the supplied AC Power
Adaptor.
(LAN) on the