Sony IPELA PCS-XG100 Operating Instructions Manual page 172

If you want to obtain the drawing rights, press the second key from the bottom
on the tablet. The
appears on the monitor screen, and you are allowed to write letters and
graphics on the screen.
To save the drawings written using annotation
1
Insert a USB storage device on which you want to save the drawings using
annotation into the Communication System.
2
Press the TOOLS button on the Remote Commander to open the Tools
menu.
3
Select "Execute" for "Screen Capture" in the Tools menu.
The drawing using annotation on the screen is saved to the USB storage
device as a still image.
To end the annotation mode
1
Press the TOOLS button on the Remote Commander to open the Tools
menu.
2
Use the V, v, B or b button on the Remote Commander to select "Stop"
for "Annotation", then press the ENTER button.
The annotation mode ends.
The letters and graphics written using the annotation function are deleted
when the communication ends.
172
Using the Annotation Function
indicator (Drawing executed by the local party)