Multipoint Attributes - Sony IPELA PCS-XG100 Operating Instructions Manual

Multipoint Attributes

Number Attribute
1 Maximum number of terminals that can be
connected to a single MCU
2 Maximum number of concurrent
(independent) connections that can be
supported in a single MCU
3 Maximum number of ports that can be
connected to other MCUs
4.1 Network interfaces at each port
4.2 Restricted network capability
5 Transmission rates available at each port
6 Audio Processor
6.1 Mixed/switched
Noise/echo suppression on "silent" ports
6.2 Audio algorithm at each port
7 Video Processor (motion pictures)
7.1 Switched/mixed
7.2 Video algorithm at each port
8 Data Processor
8.1 Data broadcast facility, LSD
Data broadcast facility, HSD
8.2 MLP Processor
9 Encryption
10 Method of choosing Selected
Communication Mode - SCM
Value (H.323 MCU)
8 (9 when including the local terminal)
1
1
LAN
–
Restricted on maximum value of total bit
rate of all points
Equipped
Mixed
No
G.711, G.728, G.722, MPEG4 AAC
(monaural only)
Equipped
Voice activated/three-split/four-split/six-
split/nine-split/user control
H.261, H.263, H.264
Equipped
–
–
–
Support
Custom:
LAN bandwidth (Restricted on maximum
value of total bit rate of all points)
Audio algorithm (G.711, G.728, G.722,
MPEG4 AAC)
Auto:
Video frame rate (7.5/10/15/30fps)
Video encoding mode (CIF/QCIF)
Fixed or switched automatically:
Video algorithm (H.261 fixed, H.261,
H.263 or H.264 switched automatically)
Multipoint Attributes
217