Sony IPELA PCS-XG100 Operating Instructions Manual page 63

2
Use the V, v, B or b button to select "Setup", then press the ENTER button
on the Remote Commander.
The Setup menu appears on the monitor screen.
Menus available from a setup menu
The Setup menus are grouped into the following depending on the setting
items. The setup menus that include many setting items are divided into
multiple pages. Select an appropriate menu button to set the respective
item.
The commonly-used menu buttons are displayed on the screen at the
factory. Pressing the F4 button on the Remote Commander allows you to
display the maximum number of setup menu buttons. To restore the
commonly-used setup display, press the F4 button again.
Menu buttons
Line I/F
Setup
Line I/F
Home
Dial
Answer
Back to Tools
Multipoint
Audio1
Video2
LAN
LAN
LAN
SIP
For a description of each setup menu, see the page for that menu indicated
below.
Line Interface setup menu (see page 66)
Dial setup menu (see page 66)
Answer setup menu (see page 67)
Multipoint setup menu (see page 67)
Communication setup menu (see page 68)
Audio setup menu (see page 72)
Video setup menu (see page 75)
LAN setup menu (see page 78)
QoS setup menu (see page 82)
TOS setup menu (see page 83)
SIP setup menu (see page 84)
SIP (UC) setup menu (see page 84)
ISDN setup menu (see page 85)
Annotation setup menu (see page 87)
Camera setup menu (see page 87)
General setup menu (see page 87)
Home Menu setup menu (see page 89)
Administrator setup menu (see page 91)
Encryption setup menu (see page 96)
Shared Phone Book setup menu (see page 96)
Line Interface
IP I SD N SI P
Primary Line Interface
IP I SD N S I P
Use LAN2 Off
Registering Local Information
63