Sip Setup Menu; Sip (Uc) Setup Menu; Sip Server Mode - Sony IPELA PCS-XG100 Operating Instructions Manual

On: Specifies the Minimum Cost bit of the
TOS field.
Off: Does not specify the Minimum Cost bit
of the TOS field.
DSCP
Enter the DSCP value. This item only
appears when "TOS" is set to "DSCP".

SIP Setup Menu

The SIP setup menu is used to connect with
an IP phone, etc. using the SIP (Session
Initiation Protocol).
Notes
• When "SIP (UC) Mode" is set to "On" in the
Administrator setup menu, this menu cannot
be configured and will be grayed out and its
settings will be disabled.
• SIP (UC) will be supported in future version
updates.
SIP
Basic Setup

SIP Server Mode

Allows you to select whether you use a SIP
server or not.
On: Enables use of the SIP server.
Off: Disables use of the SIP server.
Transport Protocol
Allows you to select the protocol to be used
for SIP.
TCP: Uses TCP (Transmission Control
Protocol).
UDP: Uses UDP (User Datagram Protocol).
This is the factory default setting.
Port Number
Enter the port number to be used for SIP.
SIP Domain
Enter the SIP domain name.
Registered User Name
Enter the user name for the terminal to be
registered to the SIP server (up to 39
characters).
84
Registering Local Information
Password
Set the password for the terminal to be
registered to the SIP server (up to 39
characters).
SIP Server Address
Enter the address of the SIP server.
SIP Server Port
Enter the port number used for
communication with the SIP server.

SIP (UC) Setup Menu

The SIP (UC) setup menu is used to
configure SIP (UC) connection settings.
Notes
• SIP (UC) will be supported in future version
updates.
• This menu appears and can be configured
only when "SIP (UC) Mode" is set to "On" in
the Administrator setup menu. In addition,
the menu's settings are only enabled when
"SIP (UC) Mode" is set to "On".
• When "SIP (UC) Mode" is set to "On", the
SIP setup menu cannot be configured and
will be grayed out.
SIP(UC) 1
SIP (UC) 1
SIP (UC) Server Address
Enter the address of the SIP (UC) server.
SIP (UC) Server Port
Enter the port number used for
communication with the SIP (UC) server.
Status
Displays the status of the SIP (UC) server.
Transport Protocol
Select the protocol to be used for SIP (UC).
SIP (UC) Port Number
Enter the port number to be used for SIP
(UC).
SIP (UC) Domain
Enter the SIP (UC) domain name.