System Configuration Via An Isdn - Sony IPELA PCS-XG100 Operating Instructions Manual

System Configuration via an ISDN

Connection to ISDN is required to use the PCSA-B384S or PCSA-B768S
ISDN Unit especially designed for use with this system.
Note
ISDN is supported in version 1.41 and later.
This allows you to:
• Have a point-to-point HD visual communication over ISDN.
• Pick up sound in stereo by using two microphones connected to the system.
• Hold an HD visual communication with high speeds and highest quality
image transmission by connecting up to three ISDN lines (when using the
PCSA-B384S) or by connecting up to six ISDN lines (when using the
PCSA-B768S).
System configuration
/
F1 F2 F3 F4
T
W
PCS-RF1
RF
About the number of ISDN lines and B (bearer) channels
Up to three ISDN lines (6B channels) with the PCSA-B384S ISDN Unit or up
to six ISDN lines (12B channels) with the PCSA-B768S ISDN Unit can be
connected to one Communication System. The more channels you use for a
single communication, the faster speeds and higher-quality picture you can
obtain for your network communication.
Note
When connecting to the ISDN Unit, Use the ports in ascending order.
Yes: 1, 2, 3...
No: 1, 6, 5...
28
System Configuration
1 PCS-XG100S/XG77S HD Visual
Communication System
2 SRG-120DH HD Camera Unit
(supplied with the PCS-XG100/XG77)
3 PCS-RFZ1 Remote Commander
4 TV monitor (not supplied)
5 PCSA-B384S or PCSA-B768S ISDN
ISDN
Unit (not supplied)
6 PCS-A1 Microphones
This diagram depicts a system
configuration using the PCSA-B768S
ISDN Unit.