Recording a Visual Communication
The video and audio of a visual communication can be saved to a USB storage
device in MPEG4 format. The saved data can then be viewed on a computer.
For details on the recording settings, see "Recording" on the "Streaming/
Recording" page of the Administrator setup menu on page 94.
To start recording
1
Insert a USB storage device into the USB port.
2
Press the TOOLS button on the Remote Commander to open the Tools
menu.
3
Press the b button on the Remote Commander and press the V, v, B or b
button to select "Execute" for "Recording", then press the ENTER button.
The message "Start recording?" appears.
4
Use the V, v, B or b button on the Remote Commander to select "OK",
then press the ENTER button.
Recording to the USB storage device starts.
During recording, the message "Recording [Executing]" is displayed in the
Tools menu and the menu item changes to "Stop".
166
Recording a Visual Communication
Tools
Presentation
Home
Streaming
Recording
Annotation
Icon display
Reject Answer
Screen Capture
Machine Status
Setup
Execute
[Suspended]
[Suspended]
Execute
[Executing]
Stop
[Suspended]
Execute
On
Off
Execute