Switching The Picture From The Remote System - Sony IPELA PCS-XG100 Operating Instructions Manual

Switching the Picture from the Remote System

You can switch the picture output from the remote system during
communication.
Press the VIDEO INPUT button, then F1 button on the Remote Commander.
The Video Input > Far menu appears.
Video Input > Far
CAMERA
Sub Camera
Use the V, v, B or b button on the Remote Commander to select the picture
output from the equipment connected to the remote system, then press the
ENTER button. The selected picture is input to the local system and is
displayed on the monitor screen.
Note
You can only select the picture that can be output from the remote system.
154
Selecting the Input Picture and Sound
HDMI DVI-I 1
Document Camera
Save
DVI-I 2
Sub Document Camera
Cancel