Setting Up The System Immediately After The Installation - Initial Setup Wizard - Sony IPELA PCS-XG100 Operating Instructions Manual

Setting Up the System Immediately
after the Installation – Initial Setup
Wizard
When you turn on the Communication System for the first time after
installation and the self-diagnosis is completed, the setup wizard appears on
the monitor screen. Register your local system data with the setup wizard using
the Remote Commander.
You can change the settings made with the setup wizard later using the setup
menus.
Note
The setup wizard will also be displayed when you install the PCSA-B384S or PCSA-
B768S ISDN Unit to your system later. Perform the setup again.
Wizard
Home
Back to Tools
To select the on-screen language
1
Use the V, v, B or b button on the Remote Commander to select "Select
Language" in the setup wizard, then press the ENTER button.
Wizard
46
Setting Up the System Immediately after the Installation – Initial Setup Wizard
IP:192.168.0.11
Select Language English
Set Region and Clock 2007.11.29 14:21
Select Line I/F IP
Set up LAN XXX.XXX.XXX.XXX
Set up ISDN
Set up SIP
IP:192.168.0.11
Select Language
Select Language
Select the on-screen language.
5/11/2008 13:00
5/11/2008 13:00
English
Save Cancel