Accessing the Communication System
The following controls are available to access the Communication System. For
details on each control, consult your Sony dealer.
Note
Depending on the operating environment, unauthorized third parties on the network
may be able to access the system. When allowing external access, be sure to configure
all of the passwords on the Password page (page 91) of the Administrator setup menu.
Using a Web Browser
You can control or set up the Communication System by accessing it from a
Web browser.
To access the Communication System from a Web browser, set "Web Access"
to "Enabled" on the Access Permit page of the Administrator setup menu
(page 94).
For details on Web operation, see Chapter 7, "Web Control Function".
Using Telnet
You can control or set up the Communication System by accessing it with
Telnet.
To access the Communication System from Telnet, set "Telnet Access" to
"Enabled" on the Access Permit page of the Administrator setup menu (page
94).
Using SSH
You can control or set up the Communication System by accessing it with
SSH.
To access the Communication System from SSH, set "SSH Access" to
"Enabled" on the Access Permit page of the Administrator setup menu (page
94).
Accessing the Communication System
183