Sip Setup Menu; Isdn Setup Menu - Sony PCS-XG80 Operating Instructions Manual

SIP Setup Menu

The SIP setup menu is used to connect with
an IP phone, etc. using the SIP (Session
Initiation Protocol).
SIP
Basic Setup
SIP Server Mode
Allows you to select whether you use a SIP
server or not.
On: Enables use of the SIP server.
Off: Disables use of the SIP server.
Transport Protocol
Allows you to select the protocol to be used
for SIP.
TCP: Uses TCP (Transmission Control
Protocol).
UDP: Uses UDP (User Datagram Protocol).
This is the factory default setting.
Port Number
Enter the port number to be used for SIP.
SIP Domain
Enter the SIP domain name.
Registered User Name
Enter the user name for the terminal to be
registered to the SIP server (up to 39
characters).
Password
Set the password for the terminal to be
registered to the SIP server (up to 39
characters).
SIP Server Address
Enter the address of the SIP server.
SIP Server Port
Enter the port number used for
communication with the SIP server.

ISDN Setup Menu

The ISDN setup menu is used to set up ISDN
lines.
ISDN1
Basic Setup
Country/Region
Allows you to select the country or region
where you are using the Communication
System.
Protocol
Allows you to select the protocol of the
ISDN lines to be used. You can select
National ISDN, Japan (NTT), Euro ISDN,
Euro ISDN (France), 5ESS (P-P), or DMS-
100, depending on the interface that you are
using.
For customers in the USA and Canada, see
"SPID Settings for Customers in the USA
and Canada" on page 90.
ISDN2
Telephone
Number
Enter the area code and local number in the
text boxes corresponding to the port
numbers on the ISDN unit.
The text boxes correspond to the port
numbers on the ISDN unit in the following
way.
A1: Port 1 on the ISDN unit.
A2: Port 1 on the ISDN unit.
B1: Port 2 on the ISDN unit.
B2: Port 2 on the ISDN unit.
C1: Port 3 on the ISDN unit.
C2: Port 3 on the ISDN unit.
Area Code
Enter the area code of the ISDN line to be
used. Do not enter the first 0 of the area code.
Local Number
Enter the line number (local number) of the
ISDN line to be used.
Notes
• When you select an empty field and then
press the ENTER button of the Remote
Commander, the setting of the previous field
is copied into the selected field.
• When using the PCSA-B768S ISDN Unit,
selecting the ISDN3 button displays the D1
to F2 text boxes. Fill in the D1 to F2 text
boxes according to the lines that you are
using.
Registering Local Information
89