SIP Setup Menu
The SIP Setup menu is used to conduct a
videoconference with an IP phone using the
SIP (Session Initiation Protocol).
For details on a videoconference using SIP,
see Chapter 9.
Note
The SIP Setup menu is available when the
system has the optional PCSA-SP1 SIP
software installed.
Page 1/3
SIP Setup
Page: 1/2
SIP Server Mode
Proxy Server Address
Registrar Address
SIP Domain
SIP Server Mode
Selects whether you use a SIP server or not.
On: Enables use of the SIP server.
Off: Disables use of the SIP server.
Proxy Server Address
Enter the address of the proxy server to be
used.
Registrar Address
Enter the address of a registrar to be used.
SIP Domain
Enter the SIP domain name.
Page 2/3
SIP Setup
Page: 2/3
Registered User Name
Password
Registered User Name
Password
Registered User Name
Password
62
Registering Local Information
ISDN
On
255.255.255.0
255.255.255.0
Save
Cancel
ISDN
ISDN
ISDN
Save
Cancel
Registered User Name
Enter the user name for the terminal to be
registered on the SIP server.
Password
Sets the password for the terminal to be
registered on the SIP server.
Note
When you conduct a multipoint
videoconference using SIP, enter the user name
and password for each terminal. Page 3/3
provides text boxes for the fourth and fifth
terminals.