Setting Up The System For The First Time - Initial Setup Wizard - Sony IPELA PCS-HG90 Operating Instructions Manual

Setting Up the
System for the First
Time — Initial Setup
Wizard
When you turn on the Communication
Terminal for the first time after installation
and the self-diagnosis is completed, the
setup wizard appears on the monitor screen.
Set your local system data with the setup
wizard using the Remote Commander.
You can change the settings made with the
setup wizard later.
1
Use the V or v button on the Remote
Commander to select the language
used for the on-screen menus and
messages in the Language Setup
Wizard.
Language: Select one of the following
languages: English, French, German,
Japanese, Spanish, Italian, Simplified
Chinese, Portuguese, Traditional
Chinese, Korean, or Russian.
Language Setup Wizard
Language
2
Use the V, v, B or b button on the
Remote Commander to select "Next",
then press the PUSH ENTER button.
The LAN Setup Wizard appears.
3
Set the following items on the LAN.
LAN Setup Wizard
DHCP Mode
Host Name
IP Address
Network Mask
Gateway Address
DNS Address
Previous
DHCP Mode
Sets the DHCP (Dynamic Host
Configuration Protocol).
2005.12.28 12:34
English
Next Cancel
2005.12.28 12:34
Auto
. . .
. . .
. . .
. . .
Next Cancel
Setting Up the System for the First Time — Initial Setup Wizard
Auto: Automatically assigns your IP
address, network mask, gateway
address and DNS address.
Off: Deactivates DHCP. In this case set
your IP address, network mask,
gateway address and DNS address
manually.
Host Name
Enter your host name (up to 30
characters).
IP Address
Enter your IP address.
Network Mask
Enter your network mask.
Gateway Address
Enter your default gateway address.
DNS Address
Enter your DNS (Domain Name
System) server address.
Note
When you set "DHCP Mode" to "Auto",
the assigned IP address is shown in the
launcher menu (page 54) or Machine
Information menu (page 59).
If you do not know how to set up the LAN
configuration, contact your network
administrator.
4
Use the V, v, B or b button to select
"Save", then press the PUSH ENTER
button.
Save Setup?
Previous Save
The settings are saved.
To cancel the setting
V, v, B or b
Press the
"Cancel", then press the PUSH ENTER
button.
To go back to the previous wizard
V, v, B or b
Press the
"Previous", then press the PUSH ENTER
button.
Cancel
button to select
button to select
29