Setting Up The System Immediately After The Installation - Initial Setup Wizard - Sony Ipela PCS-XG80 Operating Instructions Manual

Setting Up the System Immediately
after the Installation — Initial Setup
Wizard
When you turn on the Communication System for the first time after
installation and the self-diagnosis is completed, the setup wizard appears on
the monitor screen. Register your local system data with the setup wizard using
the Remote Commander.
Notes
• You can change the settings made with the setup wizard later using the Setup menus.
• The setup wizard will also be displayed when you install the PCSA-B384S or PCSA-
B768S ISDN Unit to your system later. Perform the setup again.
Wizard
Home
Back to Tools
To select the on-screen language
1
Use the V, v, B or b button on the Remote Commander to select "Select
Language" in the setup wizard, then press the ENTER button.
Wizard > Select Language
Setting Up the System Immediately after the Installation — Initial Setup Wizard
IP:192.168.0.11
English
Select Language
Set Region and Clock 2007.11.29 14:21
Select Line I/F IP
Set up LAN XXX.XXX.XXX.XXX
Set up ISDN
Set up SIP
IP:192.168.0.11
Select Language
Select the on-screen language.
5/11/2008 13:00
5/11/2008 13:00
English
Save Cancel
39