Selecting the Input Picture and Sound
This section describes how to switch the picture displayed on the monitor
screen, and how to switch the input picture and sound.
Switching the Displayed Picture Between the Local and Remote
Pictures
1
Press the FAR/NEAR button on the Remote Commander.
The Display Control menu appears.
2
Use the V, v, B or b button on the Remote Commander to select "Near" or
"Far" under "Display".
Display Control
Display
Control
3
Press the PUSH ENTER button on the Remote Commander.
Selecting the Input Picture
Press the VIDEO INPUT button on the Remote Commander to select the input
picture.
Each time you press the button, the video input is switched and the selected
video input name is displayed on the monitor screen.
Video
HD-SDI 1
Audio
MIC
HD-SDI 1: video input from the main camera
HD-SDI 2: video input from the second camera
YPbPr: video input from equipment connected to the VIDEO IN YPbPr
connectors
RGB: video input from equipment connected to the VIDEO IN RGB
connectors
S-VIDEO: video input from equipment connected to the VIDEO IN S-VIDEO
connector
Far
Near Camera
Selecting the Input Picture and Sound
103