Parts Inventory (Packing List) For An Ex9214 Switch - Juniper EX9214 Hardware Manual

• Ensure that you have taken the necessary precautions to prevent electrostatic discharge (ESD)
Prevention of Electrostatic Discharge Damage
damage (see
• Ensure that you know how to handle and store the line card (see
The line cards for EX9200 switches are rigid sheet-metal structures that house the line card components
including network ports. The line cards are shipped in a cardboard carton, secured with foam packing
material.
CAUTION: The line cards are maximally protected inside the shipping carton. Do not
unpack the line cards until you are ready to install them in the switch chassis.
To unpack a line card (see
1. Move the shipping carton to a staging area as close to the installation site as possible.
2. Position the carton so that the arrows are pointing up.
3. Open the top flaps on the shipping carton.
4. Pull out the packing material, which holds the line card in place.
5. Remove the line card from the antistatic bag.
6. Save the shipping carton and packing materials in case you need to move or ship the line card later.
Figure 45: Unpacking a Line Card Used in an EX9200 Switch

Parts Inventory (Packing List) for an EX9214 Switch

The EX9214 switches are shipped in a cardboard carton, secured with foam packing material. The carton
also contains an accessory box.
Figure 45 on page 150):
).
Handling and Storing Line Cards
150
).