Adjusting Fixing Pressure Of Fixing Unit - Konica Minolta bizhub Pro C6500 User Manual

9
9.6.4

Adjusting Fixing Pressure of Fixing Unit

If printed image on large-sized paper becomes rugged, lowering the fixing
pressure of the fixing unit may normalize the image. Reversely, if the image
duplex-printed on small-sized thick paper shows unevenness, adding fixing
pressure of the fixing unit may reduce the unevenness.
Follow the procedure below to adjust the fixing pressure of the fixing unit.
Procedure
1
Open the front door of the main body.
2
Turn the fixing conveyance unit lever
leftward to withdraw the conveyance
fixing unit.
3
Holding the handle on the left side of
the fixing unit, push it up to open the
left side cover of the fixing unit.
4
Move the fixing pressure adjustment
knob.
– Slide the knob rightward to align
the arrow mark on the lever with
the one on the right side, if print-
ed image on large-sized paper
becomes rugged.
9-56
Basic Job Settings
bizhub PRO C6500