Image Shift - Change Back Shift; Sheet/Cover/Chapter Insert - Konica Minolta bizhub C652 User Manual

7

Image Shift - Change Back Shift

To create a page margin in 2-Sided printing mode, press [Change Back Shift] to specify the image shift length
on the back side. You can specify the shift length to move the image to the left, right, top, or bottom within
1/16 to 10 inches (0.1 to 250.0 mm) to fit the page margin position.
Reference
- Specify the page margin width on a 1/16 inch (0.1 mm) basis by pressing [-] or [+].
- To set the margin width to 0 inch (0 mm), press [No Shift].
7.4.2

Sheet/Cover/Chapter Insert

You can configure the Cover Sheet, Insert Sheet, or Chapters function.
Item
[Cover Sheet]
[Insert Sheet]
[Chapters]
7-18
Print - Application (Public, Personal, or Group User Box)
Description
Prints documents with front and back covers.
Inserts colored sheets or other type of paper before the specified pages when doc-
uments are printed.
Configure this setting when printing documents in 2-Sided printing mode. Docu-
ments are printed while pages are fed so that the specified pages, the first page of
each chapter for example, necessarily turns to the front side.
bizhub C652/C652DS/C552/C452
7.4