Fuel Reserve Sensor Removal; Fuel Reserve Sensor Installation - Honda 2003 NPS50 Ruckus Service Manual

LIGHTS/METERS/SWITCHES

FUEl RESERVE SENSOR REMOVAl

Remove the floor step (page 3-7).
Disconnect the fuel reserve sensor 3P connector.
Release the wire from the clamp.
Remove the retainer by turning it counterclockwise.
Remove the fuel reserve senso
deform or damage the sensor.
Remove the rubber seal.
FUEl RESERVE SENSOR
INSTAllATION
Install a new rubber seal to the fuel reserve sensor.
Install the sensor by aligning its groove with fuel
tank tab.
Install the retainer by turning it clockwise and make
sure the arrow on the retainer align with the arrow
on the fuel tank.
Clamp the wire.
Connect the fuel reserve sensor 3P connector.
Install the floor step (page 3-7).
1 9- 1 4
.
r, being careful not to