Table of Contents
Advertisement
LIGHTS/METERS/SWITCHES
ASSEMBLY
LENS
CAP
INDICATOR
BULB
BULB SOCKET
Assembly is in the reverse order of disassembly.
Route the meter harness properly (as shown).
Install the speedometer (page 18-10).
YELLOW/WHITE
BLACK
BLUE/WHITE
FUEL GAUGE/FUEL LEVEL SENSOR
SYSTEM INSPECTION
Remove the front meter cover (page 2-12).
Measure the voltage between the Black wire termi-
nal and ground with the ignition switch turned to
ON.
If there is no voltage, check for an open or short cir-
cuit in the wire harness.
18-12
Advertisement
Table of Contents
Troubleshooting
