Engine Removal - Honda 2003 NPS50 Ruckus Service Manual

ENGINE REMOVAL/INSTALLATION

ENGINE REMOVAL

Remove the floor step (page 3-7).
Drain the engine oil (page 4-11 ).
Drain the coolant from the cooling system (page 7-
7).
NOTICE
Install the radiator cover to prevent the radiator fin
from damage.
Remove the bolts, clamps and ground wire.
Remove the rear brake arm adjusting nut, joint pin
and spring.
Remove the brake cable from the cable holder.
'03 - '05 model: Disconnect the ECT sensor, throttle position sensor
3P and SE valve 2P connectors.
After '05 model: Disconnect the ECT sensor, throttle position sensor , -- -
3P and SE valve 2P connectors.
Remove the wire harness clamp from the stay.
8-4
ECTSENSOR
CONNECTOR
HARNESS CLAMP
ECTSENSOR
CONNECTOR
3P CONNECTOR
2P CONNECTOR
2P CONNECTOR