Rear Shock Absorber Removal - Honda 2003 NPS50 Ruckus Service Manual

Install the return spring between the belt case and
brake arm.
Install the joint pin on the brake arm.
Connect the brake cable to the joint pin and install
the adjusting nut.
Apply grease to the anchor pin and brake cam slid­
ing surfaces.
Install the brake shoes and springs onto the brake
ff the brake shoes
panel as shown.
and springs are
reused, they must
Install the rear wheel (page 1 5-4).
be placed back in
Adjust the rear brake lever free play (page 4-16).
their original loca-
tions.
REAR SHOCK ABSORBER
REMOVAL
Remove the seat rail (page 3-5).
Remove the two bolts from the rear of the floor
step.
REAR WHEEL/BRAKE/SUSPENSION
BRAI<E CABLE JOINT PIN
1 5-7